HOW TO SAVE MONEY AT THE GAS PUMP
• Check Your Air Pressure
Keep your tires properly inflated and you could improve gas mileage by more than $1.50 every time you fill your tank. The recommended tire pressure for your vehicle is located on a sticker inside your driver-side door or noted in your owner’s manual.
• Maintain Your Air Filter
Replacing a clogged air filter can increase your vehicle’s gas mileage by as much as 10%.
• Watch The Weight
Excess weight in your vehicle can reduce gas mileage by 1-2% for every 100 pounds, so watch what you keep in your trunk.
• Know Your Oil
Improve your gas mileage by up to 2% with the proper grade of motor oil.
• Keep It Tuned
Keeping up with regular vehicle maintenance can allow you to increase your gas mileage by an average of 4.1%.
• Keep It Capped
Did you know about 147 million gallons of gas evaporate every year from vehicles without gas caps?
• Avoid Fast Starts
Don’t be a hot-head! Aggressive acceleration can reduce your gas mileage by up to a whopping 33%!
Tire Safety 101: Rules That Should Never Be Broken:
• Before you replace your tires, always consult your vehicle’s owner’s manual and follow the manufacturer’s replacement tire recommendations. Vehicle handling may be significantly affected by a change in tire size or type.
• When selecting tires that are different from the original equipment size, see a professional installer. This will help assure proper clearance, load carrying capacity and inflation pressure. Never exceed the maximum load capacity and inflation pressure listed on the sidewall of your tire.
• Always drive safely and obey all traffic laws. Avoid sudden, sharp turns or lane changes. Failure to follow these cautionary procedures may result in loss of control of your vehicle. It could even lead to an accident, serious injury or death.
Check Your Tire Inflation
• Proper tire inflation is essential for safe driving and long tire life. It’s wise to check your tires’ air pressure at least once a month with an accurate tire pressure gauge. Be sure to check pressure while your tires are cold and have not been used recently. Even driving a mile will cause your tire pressure to increase and give you an inaccurate reading.
• Should you experience continuous loss of inflation pressure, it could be an indication of a possible tire or wheel assembly problem. Consult your tire professional immediately if you encounter this situation.
Check Your Tire Tread
There are two popular ways to check for signs of tire tread wear. One easy way is the penny test. Simply insert a penny into your tire’s tread groove with Lincoln’s head upside down and facing you. If you can’t see all of Lincoln’s head, it’s time to replace your tires.
Another way is to look at the tread wear indicator bar that’s molded into your tires. The bars are located at the bottoms of the tread grooves in several locations around the tire. When a tire is so worn that these bars become visibly flush with the adjacent tread ribs, it’s time to replace the tire.
Encino Tire & Service suggests you check your tire tread using either method every 3,000 miles.
Know What Certain Wear Patterns Mean
• As tires wear, sometimes wear patterns emerge that can indicate problems with your vehicle or tires. If you see any of these patterns, have your tires checked by a professional Goodyear Retailer. Here are some wear patterns to watch for.
• Wear on both edges: UNDERINFLATION
Underinflation of a tire reduces its treadlife by increasing the tread wear on its outside edges, or shoulders. It also generates excessive heat which reduces tire toughness. Finally, it reduces fuel economy through increased rolling resistance because soft tires make your vehicle work harder. Abnormal tire wear may also be caused by misalignment or mechanical problems.
• Wear in center: OVERINFLATION
When a tire is overinflated, the center of the tread bears most of the load and wears out faster than the outside edges. Uneven wear reduces the useful life of a tire. It could also be the result of misalignment or mechanical problems.
• Cups or dips in the tread: WORN PARTS
Cupping (also called dipping) is most common on front tires, although rear tires can cup as well. It may be a sign that wheels are out of balance or that suspension or steering system parts are worn out.
• Sawtooth edges: MISALIGNMENT
If the edges of your tire tread take on a sawtooth or feathered appearance, it’s because of erratic scrubbing against the road. The solution is an alignment correction.
• If your tires are unbalanced, you’ll notice vibration. This can lead to driver fatigue, premature or irregular tire wear and unnecessary wear to your vehicle’s suspension. Your tires should be balanced when they are mounted on wheels for the first time or when they are remounted after repair. Check your tire balance at the first sign of vibration or shimmy.
• Your vehicle is properly aligned when all of its suspension and steering components are working smoothly and when its tire and wheel assemblies are running straight and true. If you notice uneven tread wear, it could be due to a misalignment and your vehicle should be serviced by a professional.
• While many people are knowledgeable enough to rotate their own tires, the procedure is especially quick and easy for a professional. Your vehicle’s owner’s manual will specify the proper rotation pattern and schedule for your vehicle. If no specific schedule is indicated, a good rule of thumb is to rotate your tires every 6,000 to 8,000 miles.
• Tire repairs should be made by a trained tire professional. Proper repair procedure includes dismounting the tire from the wheel. This allows for thorough inspection of the tire for damage, as well as the use of a patch and plug to repair any punctures that fall within the guidelines for repair.